Questions & Answers

Has the building height limit changed for our zone?

The ACT building height rules have changed significantly between the 2025 and 2026 planning provisions.

The 2025 rules mainly controlled building height by the maximum number of storeys, with some zones using a maximum height in metres. The 2026 rules move to a height-based system measured in metres above datum ground level and introduce different height limits depending on whether the development is single dwelling housing or multi-unit housing.

This change provides more flexibility for higher-density housing while maintaining lower height limits for individual houses.

Comparison of Building Height Rules

Residential Zone 2025 Rule 2026 Rule
RZ1 Maximum 8.5m above datum ground level Maximum 8.5m above datum ground level
RZ2 Maximum 8.5m above datum ground level Single dwelling housing: 8.5m
Multi-unit housing: 10.5m
RZ3 Maximum 2 storeys Single dwelling housing: 10.5m
Multi-unit housing: 14m
RZ4 Maximum 3 storeys Single dwelling housing: 10.5m
Multi-unit housing: 21m
RZ5 Maximum:
• 3 storeys near RZ1/RZ2/RZ3 boundaries
• 3 storeys near CFZ, PRZ1 or PRZ2 boundaries
• 4 storeys near RZ4 boundaries
• 6 storeys in other locations
Single dwelling housing: 10.5m
Multi-unit housing: 24.5m

Reference: Reference: Planning (Residential Zones) Technical Specifications 2026 (NI2026-303), Assessment Outcome 14.1- Planning (Residential Zones) Technical Specifications 2026

Last reviewed: 2 August 2026 Information current as at: 1 September 2026

Short Answer

The main change is that the 2025 rules controlled buildings mainly by storeys, while the 2026 rules control buildings by maximum height in metres and provide different limits for single dwellings and multi-unit housing. Zone 2025 Rule 2026 Rule RZ1 8.5m 8.5m RZ2 8.5m Single dwelling: 8.5m Multi-unit: 10.5m RZ3 2 storeys Single dwelling: 10.5m Multi-unit: 14m RZ4 3 storeys Single dwelling: 10.5m Multi-unit: 21m RZ5 3–6 storeys depending on location Single dwelling: 10.5m Multi-unit: 24.5m In summary: The 2026 rules replace simple storey limits with measurable height limits. Multi-unit developments generally receive higher height allowances. The changes provide more flexibility for medium and higher-density housing while maintaining lower heights for single dwellings.

Detailed Explanation

Yes.

1. Storey limits have been replaced with height limits

Under the 2025 rules, compliance was mainly determined by the number of storeys.

For example:

  • RZ3 → maximum 2 storeys
  • RZ4 → maximum 3 storeys

Under the 2026 rules, the assessment focuses on the actual building height.

Example:

A three-storey townhouse development in RZ3 may now be possible if it remains within the maximum height limit of:

  • 10.5m for single dwelling housing
  • 14m for multi-unit housing

The number of storeys alone is no longer the only determining factor.

2. Multi-unit housing receives greater height allowances

The 2026 rules introduce separate standards for different housing types.

Example:

RZ2

Development type Maximum height
Single dwelling house 8.5m
Multi-unit housing 10.5m

This recognises that multi-unit housing generally requires additional height to accommodate efficient layouts, shared spaces and increased housing supply.

3. Higher-density zones receive increased development capacity

The largest changes occur in RZ3, RZ4 and RZ5.

Example:

RZ4

2025:

  • Maximum 3 storeys

2026:

  • Single dwelling housing: 10.5m
  • Multi-unit housing: 21m

This represents a significant increase in potential building scale for appropriate multi-unit developments.

4. RZ5 changes from location-based controls to development-based controls

Previously, RZ5 height depended partly on what surrounded the site.

For example:

  • Near lower-density residential areas → lower height
  • In other locations → higher height

The 2026 rules simplify this approach by applying a clear maximum height based on the type of development.

 

Key Point

No minimum block size does not remove the need for planning assessment.

Would you like to know what these rules mean for your property?

Get a Planning Assessment prepared by our experienced planning team.